Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Large-diaphragm capsules offer pristine sound quality and exceptionally low noise
Innovative coincident capsule configuration produces accurate stereo image in smaller housing
Includes one balanced cable (two 3-pin XLRM-type connectors at output)
RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Element: Fixed-charge back plate permanently polarized condenser
---------------------------------------------------------------------------------------------
Polar Pattern: X/Y Stereo
-----------------------------------------------------------------------------------------------
Frequency Response: 20-17,000 Hz
--------------------------------------------------------------------------------------------
Low Frequency Roll Off: 80 Hz, 12 dB/octave
-------------------------------------------------------------------------------------------
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
------------------------------------------------------------------------------------------
Channel Balance: <2.5 dB
----------------------------------------------------------------------------------------
Impedance: 170 ohms
----------------------------------------------------------------------------------------
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad -nominal
-------------------------------------------------------------------------------------
Dynamic Range: 131 dB, 1 kHz at Max SPL
-----------------------------------------------------------------------------------
Signal to Noise Ratio: 80 dB, 1 kHz at 1 Pa
---------------------------------------------------------------------------------
Phantom Power Requiremens: 11-52V DC, 7 mA typical -both channels total
-------------------------------------------------------------------------------
Switch: Flat, roll-off; 10 dB pad -nominal
-------------------------------------------------------------------------------
Weight: 269 g -9.5 oz
-----------------------------------------------------------------------------
Dimensions: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter
----------------------------------------------------------------------------
Output Connector: Integral 5-pin XLRM-type
---------------------------------------------------------------------------
Cable: 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
--------------------------------------------------------------------------
Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch
